近5年发表的论文 [1] Guo Y, Zhao H*, Zhao G. Laser-Induced Superhydrophobic Polymer Surface for Droplet Manipulation, Controllable Light-Driven Actuator, and Underwater Motion Monitoring. ACS Applied Materials & Interfaces. 2025: acsami.4c22766. [2] Li Q, Zhang F, Zhao H*. Construction and biocompatibility of penetrating corneal transplant substitute with cross-linked acellular porcine cornea and biopolymer polyurethane. Biomaterials Advances. 2025, 170: 214201. [3] Guo Y, Zhao H*, Zhang C, Zhao G. Super photothermal/electrothermal response and anti-icing/deicing capability of superhydrophobic multi-walled carbon nanotubes/epoxy coating. Chemical Engineering Journal. 2024, 497: 154383. [4] Guo Y, Zhao H*, Ai C, Zhao J, Su H, Chen J, Zhao G. Parameter optimization of friction stir spot welded Al 6061 and CFRTP PA6 with surface treatment and interfacial adhesion. Thin-Walled Structures. 2024, 197: 111585. [5] Guo Y, Zhao H*. Femtosecond laser processed superhydrophobic surface. Journal of Manufacturing Processes. 2024, 109: 250-287. [6] Guo Y, Zhang F, Zhao H*, Li Q, Chen X, Zhao J. Femtosecond laser processing of steel template for mass production of superhydrophobic polyethylene film. Optics & Laser Technology. 2024, 176: 111004. [7] Guo Y, Zhao H*, Zhang C, Zhao G. Super high flux oil/water separation and efficient separation of water-in-oil emulsions by a versatile superhydrophobic multi-walled carbon nanotubes coating. Separation and Purification Technology. 2024, 348: 127759. [8] Zhao J, Zhao H*, Guo Y, Li Q, Chen X. Enhanced interfacial bonding strength of hot-pressed titanium Alloy/CFRTP joint via laser ablation and interfacial adhesive. Composites Communications. 2024, 48: 101901. [9] Li Q, Sun Y, Zhao H*, Zhang F*, Guo Y, Chen X, Zhao G. Structure and properties of the acellular porcine cornea irradiated with 60Co-γ and electron beam and its histocompatibility. Journal of Biomedical Materials Research Part A. 2024, 112: 825-840. [10] Wang K, Zhang C, Cheng Z, Zhao H, Meng Z, Chen L, Zhao G. Dynamic evolution of the T1 phase and its effect on continuous dynamic recrystallization in Al–Cu–Li alloys. International Journal of Plasticity. 2024, 175: 103948. [11] Guo Y, Zhao H*, Zhai D, Gao Z, Li Q, Chen X, Zhao G. Micro/nano dual-scale porous surface structure of the Al alloys and improvement on the joint strength with carbon fiber reinforced PA 6 thermoplastic. Composites Part B: Engineering. 2023, 249: 110407. [12] Zhao H, Gao Z, Zhai D, Zhao G*. Enhanced mechanical property of continuous carbon fiber/polyamide thermoplastic composites by combinational treatments of carbon fiber fabric. Composites Communications. 2023, 38: 101508. [13] Zhao H, Yu S, Zhang Y, Zhao G*. Mechanical properties and structure of injection molded poly(hydroxybutyrate-co-hydroxyvalerate)/poly(butylene adipate-co-terephthalate) (PHBV/PBAT) blends. Journal of Applied Polymer Science. 2023, 140: e53880. [14] Liu M, Zhang C*, Zhao H*, Meng Z, Chen L, Zhao G. Micro-/nano-scale structure and elemental diffusion in the Al/Ti/Al sandwich structure. Journal of Materials Research and Technology. 2023, 24: 9537-9552. [15] Li Q, Sun Y, Zhao H*, Gao Z, Zhai D. Structure and properties of the acellular porcine cornea irradiated with electron beam and its in-situ implantation. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2023, 111: 2013-2024. [16] Gao Z, Zhao H*, Zhai D, Li Q, Guo Y, Wang G, Zhao G. Fabrication of Microcellular Injection‐Molded Polypropylene with Super High Expansion Ratio by Precision Mold Opening Technology. Macromolecular Materials and Engineering. 2022, 307: 2200112. [17] Zhai D, Zhao H*, Gao Z, Guo Y, Li Q, Wang G, Zhao G. Surface treatment of multiwalled carbon nanotubes and the formation of the multiscale conductivity network in long carbon fiber reinforced polypropylene. Polymer Composites. 2022, 43: 4645-4659. [18] Li Q, Wang P, Liu C, Liu F, Zhao H*, Guo Y, Zhao G. Preparation and mechanical behavior of the acellular porcine common bile duct and its immunogenicity in vivo. Journal of the Mechanical Behavior of Biomedical Materials. 2022, 136: 105494. [19] Li Q, Zhao H*, Wang H, Zhao G. Properties of the acellular porcine cornea crosslinked with UVA/riboflavin as scaffolds for Boston Keratoprosthesis. Biomaterials Advances. 2022, 137: 212822. [20] Xue Y, Zhao H*, Zhang Y, Gao Z, Zhai D, Li Q, Zhao G. Design and multi-objective optimization of the bumper beams prepared in long glass fiber-reinforced polypropylene. Polymer Composites. 2021, 42: 2933-2947. [21] Song K, Bi Y, Zhao H*, Wu T, Xu F, Zhao G. Structural optimization and finite element analysis of poly-l-lactide acid coronary stent with improved radial strength and acute recoil rate. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2020, 108: 2754-2764. [22] Wang G, Zhao J, Wang G, Zhao H, Lin J, Zhao G, Park CB. Strong and super thermally insulating in-situ nanofibrillar PLA/PET composite foam fabricated by high-pressure microcellular injection molding. Chemical Engineering Journal. 2020, 390: 124520.
著作 1. H.Zhao, L.-S.Turng, Biocomposites Design and Mechanical Performance, Woodhead Publishing Series in Composites Science and Engineering, 2015
专利 获授权国家发明专利2件，实用新型专利4件。
科技奖励 1. 山东省技术发明一等奖，2022
承担科研项目情况 1. 国家自然科学基金面上项目2019.01-2022.12，项目负责人 2. 国家自然科学基金青年科学基金项目2015.01-2017.12，项目负责人 3. 山东省自然科学基金青年基金项目2019.07-2022.06，项目负责人 4. 山东省自然科学基金优秀中青年科学家科研奖励基金项目2014.12-2016.12，项目负责人 5. 广东省自然科学基金面上项目 2020.01-2022.09，项目负责人 6. 中国博士后科学基金第8批特别资助项目2015.09-2017.09，项目负责人 7. 中国博士后科学基金第56批面上资助项目2014.09-2016.09，项目负责人
|